YIHUA Anti-static Vacuum Ball Silicone Strong Adsorption with LCD
1.High-quality and imported silicone
2.Strong adsorption force
3.reduce the human’ s fingers directly contact for the product
1.High-quality and imported silicone with high resistance to tear,
making is without a trace
and you will feel nice when you touch it. And its life is quite
long, but also it has strong
2.The glass and screen or other products will never be with a trace
and you will feel very
convenient through vacuum ball.
3.Strong adsorption force,it can be reusable and don’ t nail.
Warm tips: The manual measurement, there are ±3 mm error, please
Method of use
1.First squeezing, rule out the air in the body.
2.Keep squeezing, suction cups close to the screen, loosen your
hands, the vacuum ball has been tightly
stick to the screen.
3.Pick up the vacuum ball, move to the destination.
4.Squeeze again and pick up, the screen will fall off.
The product application
Integration of the whole ball shape, reliable operation, long
service life and dedicated to take various sizes
of LCD screen.Especially suit for production of 1.6 inches above
the size of the display screen, greatly
reduce the human’ s fingers directly contact for the product,
greatly improving the work efficiency. It can
also be applied to electronic and health care and other related
1. On the surface of adsorption, if there have dirt, oil and gas,
water, waste, powder, etc., please do
not attach, but rub well first and then stick up.
2. Please don't attach to the uneven surface of the adsorption.
3. On the surface of ceramic tile, please be sure to confirm
whether the surface is smooth, and then
attach. (Some part of the surface of ceramic tile are smooth, there
will have slack phenomenon. If the
surface is flabby and uneven, it will be easy to enter into the air
from the outside , result in product easier
to pull down.) Please don't attach to the uneven ceramic tile or
4. Please put on the place that children can not touch.
5. Chuck dirt or deformation, easy to pull out the suction cups or
chuck gets aging, it is difficult to stick.
Please use neutral detergent to clean in the warm water and soak
for about 5 minutes and then blow it dry
6. Please do not use outside the work area.
7. Please do not use on beside the fire.